Accueil > Conférence

Découvrez le programme 2018

2018 program :

May 22nd 2018

1.50 pm Welcome Note

2.00 pm Introductory Note

ENVIRONMENTAL REGULATION:WHERE WE ARE

2.25 pm Influence of the microstructure of AA 2024 on the anti-corrosion properties of trivalent chromium

  • Christine BLANC, Professor, CIRIMAT (FRANCE)

2.45 pm Qualification of tsa long cycle and first implementations

  • Malik BOUTOBA , Metallic Material and Process Engineer, AIRBUS HELICOPTERS (France)
  • Veronique MARCEL, Materials and Processes Quality Assurance Manager, SAFRAN LANDING SYSTEMS (France)

3.10 pm From laboratory investigations to large scale tests in europe and in usa : hard chrome electroplating by trivalent chromium solutions

  • Jerome FRAYRET, Research engineer, INEOSURF (France)
  • Timothy HALL, Principal Research scientist, FARADAY TECHNOLOGY INC. (USA)
  • Jean-Yves HIHN, PROFESSOR, UTINAM CNRS UNIVERSITY BFC (France)

3.35 pm New CR(VI)-free hard chromium process for aeronautical applications

  • Benoit FORI, Scientific coordinator, MECAPROTEC INDUSTRIES (France)
  • Olivier BRUCELLE, Fellow & Head of metallic materials ans special prcesses, UTAS IAPS RATIER-FIGEAC (France)

4.00 pm - Coffee break and exhibitors’ area tour

4.30 pm - ROND TABLE Cr VI

Trivalent conversion and post-treatment, how to master the process ?

  • Emilie CHAMPAGNE, Technical support Engineer, SOCOMORE (France)

New Application Process & Formulation Prevents Hexavalent Chrome Formation

  • Eric MORRIS, Global Tech Manager, PPG (USA)

"LANTHANE 613.3 & LANTHANE DIP 610 : new system to substitute Cr VI conversion coatings"

  • Marjorie PONS, R&D engineer, COVENTYA/IRT (France)

Cr(III)-Technology for Conversion Coating and the future trends for a Cr(free)-Technology

  • Anke SCHÜTTE, Tcs Test Engineer, HENKEL (Germany)

Trivalent chromium passivation (TCP) layer formation processes and enhancement of the surface finish by surface active components

  • Peter VOLK, Head of Research & Development metal Pre-Treatment & Industrial parts cleaning, SURTEC INTERNATIONAL GMBH (Germany)

May 23rd 2018

9.00 am Opening : The current state of development in US Department of Defense applications

  • Keith LEGG, CHIEF TECHNOLOGY OFFICER, CORRDESA (USA)

09.20 am Al coatings electrodeposited from ionic liquids for Cd replacement in high strength steel alloys

  • Usoa IZAGIRRE, Superficies Avanzadas y Recubrimientos / Advanced Surfaces & Coatings, TECNALIA REASEARCH AND INNOVATION (SPAIN)

09.40 am Zn-Ni 12-16% as multifunctional coating for landing gear applications

  • Sacha MIERZEJEWSKI, Surface Treatment Expert, SAFRAN LANDING SYSTEMS (FRANCE)

10.00 am New Accelerated Cyclic Electrochemical test (ACET) to assess durability of protection system

  • Stéphanie BARBREL , HEAD OF SURFACE ENGINEERING, DASSAULT AVIATION (FRANCE)

10.20 am Coffee break and exhibitors’ area tour

10.50 am New Corrosion Test Method Development

  • Nels OLSON, PH.D. CHEMIST/TECHNICAL LEAD ENGINEER/PRINCIPAL INVESTIGATOR, THE BOEING COMPANY (USA)

11.10 am Healing properties of waterborne coatings on 2024 aluminum alloy : a local electrochemical impedance approach

  • Nadine PEBERE, Researcher, CNRS (France)

11.30 am Monitoring of surface coatings on aircraft

  • Jay PATEL, PRINCIPAL SCIENTIST, QINETIQ (UNITED KINGDOM)

11.50 am Gel-based local passivation of stainless steels : a solution for assemblies and mro

  • Josefa RODRIGUEZ BAENA, METALLIC MATERIALS & SURFACE TREATMENTS, AIRBUS DEFENSE AND SPACE (SPAIN)
  • Norberto ROIZ LAFUENTE, HO QUALITY OF MATERIALS & PROCESSES, AIRBUS DEFENSE AND SPACE (SPAIN)

12.10 pm Hard anodizing improvement with an enhanced sealing process after anodizing applied at lubrication units on helicopters and aircraft engines

  • Philippe BAYARD, Surface Treatment Expert, SAFRAN AIRCRAFT ENGINES (France)

12.30 pm Selective thermal stripping of aeronautic paints

  • Florent DELIANE, Smart Coatings Expert, RESCOLL (FRANCE)

12.50 pm Lunch break and exhibitors’ area tour

ADVANCED MATERIALS AND INNOVATIVE COATING APPLICATION PROCESSES

2.30 pm Hand-in-hand development of new protective coatings and evaluation technologies : an algae-based inhibitor release system (Co-author Santiago GARCIA, Associate Professor)

  • Paul DENISSEN, PhD candidate, NOVEL AEROSPACE MATERIALS GROUP, DELFT UNIVERSITY OF TECHNOLOGY (The Netherlands)

2.50 pm Challenges associated with testing the functional durability of hydro- / icephobic coatings

  • Elmar BONACCURSO, Project manager, AIRBUS – CENTRAL R&T (Germany)

3.10 pm Plasma electrolytic oxidation of TA6V : influence of process parameters for the improvement of its mechanical superficial properties

  • Marie LAVEISSIÈRE, Phd student, IRT SAINT EXUPÉRY (France)

3.30 pm Improving development processes for functional coating materials

  • Nadine REHFELD, Researcher, FRAUNHOFER IFAM (Germany)

3.50 pm - Coffee break and exhibitors’ area tour

4.20 pm Computational studies of adhesion between crosslinked epoxy and hydroxylated substrates

  • Benoît MINISINI, Application scientist, MATERIAL DESIGN (France)

4.50 pm Innovations in film coating technologies for internal and external aircraft surfaces

  • Matthew AMICK, Technical manager, AKZONOBEL SPECIALTY COATINGS (USA)

5.10 pm Duplex anodising and sol-gel sealing of aluminium alloys

  • Brendan DUFFY, Head of /Dir./ Manager R&D / Innovation / Engineering, CREST, Dublin Institute of Technology, Kevin St. (Ireland)

5.30 am - End of conferences

May 24th 2018

ADAPTATION TO NEW TECHNOLOGIES AND MANUFACTURING TRENDS

09.20 am Enabling thermoplastic composites : robust surface preparation for finishes

  • Karen SCHULTZ, Materials engineer, THE BOEING COMPANY (USA)

09.40 am Laser surface treatment for Ariane 6 cryogenic tanks

  • Antoine MERCIER, Materials & processes engineer - Technical leader laser surface treatment, ARIANEGROUP (France)

10.00 am - coffee break and exhibitors’ area tour

10.30 am Optimization of the process « from manual to automatization up to production operation management »

  • Marc FURMANNEK, Senior sales manager, DURR (Germany)

10.50 am How to go from a manual painting process for blades finishing to an automated workshop

  • Manon FOULC, Materials and process engineer, AIRBUS HELICOPTERS (France)

11.10 am Can hybrid systems fulfill the needs of high precision cleaning ?

  • Richard STARKEY, Industry manager – Aviation, SAFECHEM Europe GmbH (Germany)

12.10 pm - SURFAIR AWARDS

12.30 pm Lunch break and exhibitors’ area tour

02.00 pm End of the event