Home > Conference

2020 program

September 23rd 2020

1.30 pm Welcome coffee & Discovery of exhibitors’ area

2.00 pm INTRODUCTORY NOTE

Theme 1 What can we do to improve sustainability and reduce our impact on the environment? How engaged are we?

2.20 pm REDUCTION OF VOC EMISSION IN THE PLANT OF DONAUWÖRTH – QUALIFICATION OF VOC-FREE DEGREASER FOR SURFACE PREPARATION PRIOR TO PAINTING
Marion REITER - Materials Engineer - AIRBUS HELICOPTERS DEUTSCHLAND GMBH - GERMANY

2.40 pm SUPER-HYDROPHOBIC AND EROSION RESISTANT COATINGS FOR TURBINE SCROLL AND DOWNSTREAM PIPE
Fabiola BRUSCIOTTI - Researcher - TECNALIA – SPAIN
Hugo PERVIER - Research Fellow - CRANFIELD UNIVERSITY – UK

3.10 pm GRAPHENE ENHANCED COATINGS FOR SUSTAINABLE CORROSION PROTECTION IN THE AERONAUTICS AND AEROSPACE INDUSTRIES
Thomas BOTTEIN - R&D ENGINEER - CARBON WATERS – FRANCE
Alban CHESNEAU - CEO - CARBON WATERS – FRANCE

3.40 pm MAGNESIA – DEVELOPMENT OF A COMPLETE CORROSION PROTECTION SYSTEM FOR MAGNESIUM AND ITS ALLOYS
Nicolas GUÉDOT - Project & Development Manager - SATYS – FRANCE
Mathieu NICOLAS, Research & Engineer - SATYS – FRANCE

4.10 pm EXHIBITORS PITCH SESSION

4.30 pm COFFEE BREAK

5.00 pm RING : SOL-GEL ADHESION PROMOTER FORMULATION FOR MANUAL SANDING REPLACEMENT
Florent DELIANE - Smart Coatings Technical Expert - RESCOLL – FRANCE

5.20 pm PRIMERLESS AEROSPACE TOPCOAT
Dayong CHEN - Research Chemist - PPG – USA

5.50 pm AIRCRAFT ACTUATOR OIL LEAKAGE AND PARTS CORROSION PREVENTED BY HARDIDE CVD TUNGSTEN CARBIDE COATING, APPROVED BY AIRBUS AS ENVIRONMENT-FRIENDLY ALTERNATIVE TO HARD CHROME PLATING
Yuri ZHUK - Technical Director - HARDIDLE PLC – UK

6.10 pm AIRBUS CADMIUM REPLACEMENT APPROACH
David COLLINS, Airframe Technical Advisor - AIRBUS– UK

6.30 pm End of conferences

6.45 pm COCKTAIL

September 24th 2020

Theme 1 What can we do to improve sustainability and reduce our impact on the environment? How engaged are we?

09.00 am ANAPHORESIS, INDUSTRIAL CHALLENGE AND UNIQUE CHROME FREE SOLUTION FOR SOME PARTS
Stéphanie BARBREL - Head of Surface Engineering - DASSAULT – FRANCE

09.20 am DEVELOPMENT AND OPTIMIZATION OF CR FREE SEALING PROCESS FOR THIN SULPHURIC ACID ANODIZATION (SAA) LAYERS ON ALUMINIUM ALLOY AA2024 AND IMPLEMENTATION TO OTHER ALUMINIUM ALLOYS
Godja NORICA CARMEN - GROUP LEADER SURFACE TECHNOLOGY - CEST CENTRE OF ELECTROCHEMICAL SURFACE TECHNOLOGY – AUSTRIA

09.40 am HARD CHROME PLATING BY TRIVALENT CHROMIUM : MAJOR ADVANCES AND FIRST INDUSTRIAL APPLICATION WITH THE DURATRI 240 ELECTROLYTE OF COVENTYA
Johann MERLET - Project Manager - IRT M2P – FRANCE
Laurent BORTOLOTTO, Expert Surface Treatments & Corrosion - AIRBUS HELICOPTERS – FRANCE

10.10 am EXHIBITORS PITCH SESSION

10.30 am COFFEE BREAK

Theme 2 Are our laboratory tests representative of in service behavior ?

11.00 am TRIVALENT CHROME CONVERSION & SEALING SOLUTION BY IMMERSION & TOUCH UP
Emilie CHAMPAGNE - Technical Support - SOCOMORE – FRANCE
Martin GOIBIER - Product Manager - SOCOMORE – FRANCE

11.30 am IN SERVICE BEHAVIOR OF THE TRIVALENT CHROMIUM PASSIVATION PROCESS MAINTENANCE AND QUALITY CONTROL
Peter VOLK - HEAD OF RESEARCH & DEVELOPMENT METAL
PRE-TREATMENT & INDUSTRIAL PARTS CLEANING - SURTEC INTERNATIONAL GMBH – GERMANY

11.50 am Feedback from the deployment of the Industrial Qualification of Trivalent Chemical Conversion on Aluminum > which theme ?
Ngoc QUACH - SURFACE TREATMENT AND PAINTING SPECIALIST - THALES – FRANCE

12.10 pm LUNCH BREAK

2.00 pm ADVANCED CORROSION TESTING: TEST RESULTS VS IN-SERVICE CONDITIONS. IMPROVED TEST
David SINOPOLI - Material Engineer - AIRBUS HELICOPTERS - FRANCE

2.20 pm TOWARDS A CORROSION TEST REPRESENTAIVE OF ARIANE 6 LIFECYCLE
Marine DELAIGUE - ENGINEER MATERIALS AND PROCESSES - ARIANE GROUP – FRANCE

2.40 pm RHEOLOGY-GUIDED FORMULATION TO IMPROVE APPEARANCE AND PERFORMANCE OF PIGMENTED TOPCOATS
Matthew DAVIS - RESEARCH CHEMIST - PPG – USA

3.00 pm ACCELERATED TESTING OF AEROSPACE COATING SYSTEMS USING COMBINED MECHANICAL STRESS AND ENVIRONMENTAL EXPOSURE
Karen SCHULTZ - MATERIALS ENGINEER - THE BOEING COMPANY– USA

3.20 pm COFFEE BREAK

3.50 pm SURFAIR LAB : new challenges, new trends

3.50 pm TAMS (TOTAL APPEARANCE MEASURMENT SYSTEM) - A NEW TECHNOLOGY FOR ASSESSING AIRPLANE APPEARANCE QUALITY
Pierre MORANDI - TECHNOLOGY LEADER APPEARANCE PRODUCT - KONICA MINOLTA – UK

4.10 pm PITCH START UP

4.30 pm AUTOMATIC PAINT APPLICATION INCL. ENVIRONMENTAL TOPICS, DIGITAL PRODUCTS, FUTURE OUTLOOK AND VISIONS
Marc FURMANNEK - DURR – GERMANY

4.50 pm PITCH START UP

5.10 pm KEYNOTE SPEAKER CLOSURE

5.30 pm End of conferences

7.30 pm GALA DINNER

September 25th 2020

Theme 3 New ways of manufacturing: is the surface treatment and painting ready?

09.00 am DEVELOPMENT OF A POLISHING SOLUTION FOR TA6V AND AS7G06 ADDITIVE MANUFACTURING PARTS
Jérôme FRAYRET - CHEMISTRY POLE MANAGER - INEOSURF – FRANCE
Joffrey TARDELLI - SCIENTIFIC EXPERT - IRT M2P – FRANCE

09.30 am
CHROMAERO PROJECT : DEVELOPMENT OF A NEW HARD CHROMIUM PROCESS FROM TRIVALENT CHROMIUM
Benoît FORI - SCIENTIFIC COORDINATOR, MECAPROTEC – FRANCE
Robin GUILLON - PHD STUDENT - ENIT LABORATOIRE GENIE DE PRODUCTION (LGP) – FRANCE

10.00 am COFFEE BREAK

10.30 am ACCELERATED CURE COATINGS FOR MANUFACTURING AND ENERGY EFFICIENCY
Karen SCHULTZ - MATERIAL ENGINEER - THE BOEING COMPANY – USA

10.50 am DRY PAINT FOR COMPOSITE MANUFACTURING AND REPAIR
Sébastien ROY - R&D MANAGER - CORSO MAGENTA – FRANCE
Gwendal HUET - OEM BUSINESS MANAGER - CORSO MAGENTA – FRANCE

11.20 am 3.LEAF (LASER ENHANCED AIR FLOW) – TOWARDS INDUSTRIALIZATION OF LASER RIBLETS
Tobias DYCK, HEAD OF NEW BUSINESS, 4JET - GERMANY
Gunnar HANSEN, DIRECTOR - HEAD OF R&D AVIATION, MANKIEWICZ - GERMANY

11.50 am NEW THIN FILM SULFURIC ANODISING, DEPLOYMENT STRATEGY OF THE PROCESS IN THE SUPPLY CHAIN
Charles JAMBON - SURFACE TREATMENT EXPERT - DASSAULT AVIATION – FRANCE

12.45 pm SURFAIR AWARDS